
A Blogger post feed redirect sends post-feed traffic to the full URL entered in Post feed redirect URL. To use Blogger’s own feed again, open Settings, find Site feed, clear that field, and save the setting. Google’s Blogger documentation states that a blank field means there is no redirection.
This setting applies to post feeds. It does not change a custom-domain redirect, which sits in Blogger’s Publishing settings and handles a different type of address routing.
What the Post feed redirect URL does
Blogger includes a Site feed area in its settings. The Post feed redirect URL field is for a full feed address from FeedBurner or another feed-processing service. When an address is present, Blogger redirects all post-feed traffic to that address.
That arrangement can suit a blog using a separate feed service. It can also become confusing when the external address is no longer the feed you want readers to use. The direct fix inside Blogger is narrow: remove the value from the Post feed redirect URL field.
Google describes the blank state plainly: no redirection. The field does not need a replacement URL if the goal is to return to Blogger’s native feed.
Clear the redirect in Blogger
Sign in to Blogger and select the blog concerned. Open Settings, then locate the Site feed section. Find Post feed redirect URL and remove the complete URL stored in the field. Save the change.
Do not paste the homepage of the blog into this field. Blogger identifies it as a place for a full feed URL when a third-party service processes the feed. Leaving the field empty restores the no-redirection setting.
The setting is easy to confuse with Custom redirects under Errors and redirects. Those redirects send one page path on the blog to another page path. They are separate from the post feed redirect. A custom-domain redirect is separate again: Blogger documents it as a redirect from a naked domain such as example.com to a custom domain such as www.example.com.
Use Blogger’s native post-feed addresses
For a public Blogspot blog, Blogger documents two full-site post-feed formats. Replace blogname with the address of your own blog.
| Feed format | Documented address pattern |
|---|---|
| Atom 1.0 | http://blogname.blogspot.com/feeds/posts/default |
| RSS 2.0 | http://blogname.blogspot.com/feeds/posts/default?alt=rss |
These are examples, not addresses to copy unchanged. A blog called sample-notes.blogspot.com, for example, would substitute sample-notes for blogname. That example is fictional.
Blogger also documents feed addresses for comments, labels, and comments on an individual post. Those addresses serve different material. If the aim is to share new blog posts, start with the post-feed patterns above rather than a comment feed.
Blogger says its full-site feeds update in real time. The same help page also mentions PubSubHubbub for developers who subscribe to low-latency updates. Neither statement says that removing a redirect repairs a third-party feed service or automatically changes every feed reader that already follows an older address.
For the documented feed formats and the settings steps, see Blogger Help: Share content on other sites.
Check whether Blogger is allowed to publish a feed
Clearing the redirect field only addresses redirection. Blogger must also have a site feed enabled.
Under Settings and Site feed, open Allow blog feed. Blogger provides these choices:
- Full shares the entire content of each post.
- Until Jump Break shares the content before the jump break.
- Short shares an excerpt from the beginning of each post.
- Custom opens advanced choices for posts, comments, and per-post comments.
- None turns the site feed off entirely.
A post-feed URL cannot supply a Blogger XML feed when None disables it. If you choose Custom, check the post-feed option too, since Blogger separates the settings for blog posts, blog comments, and per-post comment feeds.
The amount of text readers receive depends on this selection. Choosing Full shares each post in full. Until Jump Break follows the jump break in each post. Short shares an excerpt. This choice affects the content Blogger publishes through its feed; it is independent from whether the Post feed redirect URL is blank.
Blogger also states that a post feed footer appears after each post in the feed and that this feature requires Allow blog feed to be set to Full. If a footer was part of an earlier feed setup, review it separately after removing the redirect. It is not the redirect setting itself.
Private blogs have a documented limit
Blogger’s feed help page gives one direct restriction: site feeds do not work with private blogs. The page presents the documented Blogger feed URLs for sharing a blog, then states that limitation.
Check the blog’s Reader access setting before troubleshooting the address. Blogger lists Public, Private to authors, and Custom readers as access choices. A private access setting changes who can read the blog, while the Site feed documentation says private blogs do not support site feeds.
That distinction matters when a native address looks correct but does not meet the sharing need. Clearing the redirect cannot override Blogger’s stated restriction for private blogs.
Verify the address after saving
After saving a blank Post feed redirect URL, build the native post-feed address with your own Blogspot address. Use the Atom address or the RSS address documented by Blogger. Confirm that the selected Allow blog feed setting matches the content you want to share.
Keep the checks separate:
- The redirect field decides whether Blogger redirects post-feed traffic to another address.
- Allow blog feed decides whether Blogger publishes a site feed and how much post content it shares.
- Reader access affects whether the blog is public or restricted.
This separation keeps the diagnosis honest. A blank redirect means no post-feed redirection in Blogger. It does not make a private blog’s feed available, rewrite a custom-domain redirect, or promise a result inside an external service.
Are you testing the Atom URL, the RSS URL, or both? Is Allow blog feed set to the amount of content you intend to share?